Vision 3200W Electric Radiant Heater
Subtle orange glow which is
only 30-40% of the light output
HEATSCOPE® Vision 3200W ambient heater emits medium-wave infrared light with its parallel carbon heating strands. Since the already low luminosity of less than 300 lux is still dimmed by the glass-ceramic front, a cozy atmosphere is created.
Product Configuration
Downloads
Key Features
Efficiency made simple
HEATSCOPE® is committed to efficiency! All VISION, SPOT and PURE radiant heaters were developed in accordance with the newest findings concerning the mid-wave IR range. This means that between 90% and 94% of the energy used is turned directly into ambient heat.
Real infrared
All HEATSCOPE® design radiant heaters produce natural infrared heat in the (fast) mid-wave IR range. This means that the heat feels particularly pleasant and is effective exactly where it is needed – that’s directly under the first layers of skin, but not too deep in the tissue.
Inviting & cosy
Other radiant heaters use light tubes to produce heat as a by-product – at HEATSCOPE® we exclusively use innovative carbon technology: two carbon spirals are powered with an electric current, they begin to glow and produce a particularly pleasant warmth.
Super fast
Output peaks are a thing of the past with HEATSCOPE® power heaters. Although the heaters start up slowly, they reach 100% in no time: the range of SPOT models take only 15 seconds, and the VISION & PURE range takes a maximum of 30 seconds owing to the glass front.
Full control
The separate model ranges are either delivered with their own IR remote control or with a 4-wire cable for integration into an external control system (output dependent).
Award-winning design
Delivers pleasant heat without the distraction. Clean-cut, modern designs and colours easily blend into any decor.
Weather-resistant
All models are certified with an IP rating for protection against dust, splash-water, and wind.
No aggressive red light
Produces a very ambient, modest light based on double carbon heating elements.
High efficiency
Up to 94% of the energy used is turned into ambient heat and transferred directly to nearby people and surfaces for maximum efficiency.
Smart switch
Operate and sync your heater(s) with your smart device (compatible with Alexa and Google Assistant). *Internet connection and additional accessories required
2-year warranty
Our radiant heaters come with an industry leading two-year limited warranty.
Technical Specifications
Installation Height
Power / Current
Voltage
Max. Power In
Radiant Efficiency
Visible Light
Coverage Area
This graphic shows the heating performance of Heatscope Vision 3200W heaters. Please note that the heat output always depends on a wide range of factors.
They include: Installation environment (indoors or outdoors, enclosed or open, wind-protected or wind-prone), installation height, radiation angles, weather, voltage fluctuations, etc.
Please consider all these factors in your planning.
*All values are approximate. Max. temperature increases achievable in enclosed spaces at 16 °C (dependent on the respective installation conditions and mounting height).
Construction
- MPN (Black) MHS-VE3200AB.100
- MPN (White) MHS-VE3200WT.100
- Weight 10kg [22.05lb]
- Model Dimensions mm [in] L 1660mm [65.4in] W 184mm [7.2in] H 87mm [3.4in]
- Application Indoor & Outdoor
- Materials Aluminum body, glass ceramic front
- Colours
Accessories
Includes everything you need to easily operate and protect your investment for many years to come.
FAQ's
View AllHow do I replace the carbon element fibres of my HEATSCOPE® heater?
Changing the carbon fibre elements of the HEATSCOPE® heater must not be done by yourself. You will need to engage a licensed electrician to perform the service.
How much power do HEATSCOPE® radiant heaters consume?
HEATSCOPE® heaters are energy efficient appliances, for consumption please follow the table below.
| Model | kW/hour | Cost/hour | Cost/year |
|---|---|---|---|
| Spot 2800W | 2.8kW-h | $0.56 | $100.80 |
| Vision 3200W | 3.2 kW-h | $0.64 | $115.20 |
| Pure 3000W | 3.0 kW-h | $0.60 | $108.00 |
Can my radiant heater be installed near a power outlet?
The heater must not be installed directly below a power source/socket, and the sides of the unit must be at least 20cm from the nearest power source. For further details, please refer to the installation manual.
How does the remote control work?
The remote control has 2 buttons so you can choose to turn on/off each carbon heating element individually for 50% or 100% heat. Alternatively, you can use your smartphone or tablet as remote control via the eWeLink app.
How do I clean my HEATSCOPE® heater?
To clean the appliance, you will need to disconnect the radiant heater from the power supply at least 1 hour after operation. Make sure the heating elements are not glowing anymore before you do this. To wipe off any dirt or dust to the exterior housing, only use a soft damp cloth.
Can all HEATSCOPE® heaters be mounted on the wall or ceiling?
Yes. All models are supplied with a bracket for wall or ceiling mounting.
What type of infrared waves are produced by other heaters available in the market?
Other infrared heaters work with short waves, and produce heavy red light with an unnatural, uncomfortable heat.
Can I cover my HEATSCOPE® heater?
No, never cover the appliance nor enclose it with insulating or similar materials. Adequate ventilation surrounding the heater must be ensured at all times.
You May Also Like
Collection
500mm Pure Extension Rod Black
Extend the reach of your HEATSCOPE® heaters on high ceiling installations
500mm Extension Rods Black
Extend the reach of your HEATSCOPE® heaters on high ceiling installations
Weathershield 3 White
The HEATSCOPE® weather shield is designed to protect the Heascope heater from the elements in installations where no covering is possible.
Spot 2800 Lift Frame
Frame for HEATSCOPE® Spot 2800 unique lift system solution.
100mm Pure Extension Rod White
Extend the reach of your HEATSCOPE® heaters on high ceiling installations
Weathershield 3 Black
The HEATSCOPE® weather shield is designed to protect the HEATSCOPE® heater from the elements in installations where no covering is possible.
Lift (Lifting System)
HEATSCOPE® offers its own unique lift system solution for flush ceiling installation.
Vision 3200 Lift Frame
Frame for HEATSCOPE® Vision 3200 unique lift system solution.
300mm Extension Rods White
Extend the reach of your HEATSCOPE® heaters on high ceiling installations
100mm Extension Rods White
Extend the reach of your HEATSCOPE® heaters on high ceiling installations
300mm Pure Extension Rod White
Extend the reach of your HEATSCOPE® heaters on high ceiling installations
Dual Fixing Brackets (2 Heaters)
Install two heaters in one mounting system using HEATSCOPE® Dual Fixing Brackets.How Can We
Help?
Step-by-step guidance to find the right solution for your needs, trade professional benefits, and ongoing support before and after your purchase.
Live Chat-
Project Assistance
From product selection, to material sourcing, and project reviews, our team is here to help.
-
Dedicated Support
Our unparalleled support and versatile product range makes designing with fire simpler than ever.
-
1-on-1 Screenshare
Can't make it to our showroom? Book an online consultation with our team of specialists.
-
Business Programs
Smart pricing, personalised support and unparalleled creative freedom.
-
Exclusive Pricing
Enjoy exclusive discounts across our entire range of fireplaces and fire pits.